DIN 18008 Compliance for Aluminium-Framed Glass Railings — A Specifier's Reference
Glass build-ups, framing categories, line-load demand and impact verification for fall-protection glazing under DIN 18008-1 and DIN 18008-4.
Rezumat
DIN 18008-4 is the German binding standard for fall-protection glazing. It defines three framing categories (A: line-supported four-sided, B: line-supported on lower edge with continuous top rail, C: point-fixed) and the corresponding glass build-ups, all of which must additionally satisfy the imposed line load qk per EN 1991-1-1 and a pendulum impact test for category B and C. This article distils the standard into a step-by-step verification path for aluminium-framed glass railings as supplied by VisioMod, with worked thicknesses for typical residential and assembly-area uses.
Cuprins
- 011 · Scope and applicability
- 022 · Framing categories A, B and C
- 033 · Imposed line load (handrail) per EN 1991-1-1
- 044 · Glass build-up requirements
- 055 · Pendulum impact verification
- 066 · Anchor design and substrate verification
- 077 · Inspection, maintenance and residual life
Articol integral — acces înregistrat
Corpurile secțiunilor, link-urile bibliografice și atașamentele Technical files descărcabile sunt rezervate arhitecților, inginerilor și distribuitorilor înregistrați. Înregistrați biroul dumneavoastră pentru a citi articolul integral.
- ▸ Secțiuni complete + exemple lucrate
- ▸ Link-uri editură directe (Beuth, CEN, ISO)
- ▸ Atașamente Technical files / PDF unde se aplică
Corpul după login — rezumat și referințe sunt publice.