Planner Portal|Dealer Login
PONARC
VisioMod

PRODUCT DATASHEET

VisioMod Verto — Vertical Aluminium Slat Fence

PRODUCT DATASHEET

VisioMod Verto — Vertical Aluminium Slat Fence

Vertical aluminium slat fence — Lineo's twin rotated 90°.

CODE VF-VRTVISIOMOD BY PONARC
VisioMod Verto — Vertical Aluminium Slat Fence

Key features

  • 4 vertical slat widths: 30 / 50 / 80 / 140 mm
  • Same RAL + woodgrain palette as Lineo
  • Identical view both sides — no visible fasteners
  • Heights 900 / 1200 / 1500 / 1800 / 2000 mm
  • Concealed top + bottom rails

Technical specifications

Slat width30 / 50 / 80 / 140 mm
Slat thickness20 mm hollow extrusion
Slat orientationVertical (perpendicular to grade)
Frame profile40 × 40 mm aluminium 6063-T5 — top + bottom rail
Standard heights900 / 1200 / 1500 / 1800 / 2000 mm
Maximum span2500 mm between posts
Posts60×60 / 90×90 mm aluminium — bolt-down or concrete-set
Surface finishQualicoat Class 2 powder coat — any RAL
Wind resistance (standard)1.0 kN/m² — Zone 1–2 inland
Wind resistance (coastal)1.4 kN/m² — Zone 3–4 coastal upgrade
Reference standardWind action design per EN 1991-1-4 + National Annex

Standards & certifications

  • DIN 18065 · Stairs and railings (residential)
  • EN 1991-1-1 · Densities, self-weight, imposed loads
  • EN 1991-1-4 · Wind actions
  • TRAV · Impact-resistant glazing (where applicable)
  • EN 1090-3 · Execution of aluminium structures
  • EN 12150 · Tempered safety glass
  • EN AW-6063-T5 · Aluminium alloy / temper
  • ISO 9001 · Manufacturer quality management

Warranty

10 years on aluminium frame · 5 years on TIGER powder coat · 5 years on motorised drive (where fitted). Conditions: install within 12 months of delivery, follow installation manual, observe rated wind/snow loads.

Order & support

PONARC Group · Sales: info@luxashade.com · Specifiers / architects: support@ponarc.com · Available across DE / AT / CH / NL / BE / FR / IT / RO / RU / SE / DK.

© PONARC GROUP · VISIOMOD

PN-DS-VERTO-EN · Rev. 01 — 2026-05-03

01/01

PAGE

Pick "Save as PDF" in the print dialog.