INSTALLATIONSVEJLEDNING
14 trin til en færdig Vægmonteret veranda med glas / polycarbonat.
Vægmonteret aluminiumsveranda med fast tag i glas eller polycarbonat — vinterhave-stil, 14-trinsprocedure med W (bredde) × P (udhæng) referencegeometri.
-
01
Placér jordankrene
First action on the slab — anchor the two ground connections, mark W × P footprint.
RAMME25 min -
02
Sæt søjlerne i jordankrene
Insert the front PN-VP-100 pillars onto ground connections — plumb in two directions.
RAMME18 min -
03
Fastgør vægprofilen til væggen
Anchor PN-WP-100 wall profile at H1 / H2 height — laser-level the entire wall line.
RAMME25 min -
04
Montér forreste tagrende-profil
Install the front PN-GU-300 gutter profile between pillars — finger-tight first.
RAMME22 min -
05
Montér afløbsrør og vandafledere
Install drain tubes (PN-DT-100) and PN-WD-100 water drainers in the gutter.
RAMME12 min -
06
Forbered bærer-fastgørelsesmøtrikker
Pre-load PN-NT-080 channel nuts into all carrier-fixing positions.
RAMME12 min -
07
Indsæt hoved-bjælkerne
Insert main carrier profiles (PN-MC-100, PN-MC-110 mid-span) front to wall.
BJÆLKER30 min -
08
Fastgør hoved-bjælkerne med beslag
Fix main carriers with PN-BR-300 brackets at both ends — bracket alignment critical.
BJÆLKER25 min -
09
Indsæt dækprofiler mellem bjælkerne
Insert PN-CP-300 cover profiles between carriers — defines glass/polycarbon channels.
BJÆLKER25 min -
10
Indsæt glas- eller polycarbonat-fyldningsplader
Drop in PN-GL-300 glass or PN-PC-310 polycarbonate infill panels — handle with cups.
BJÆLKER38 min -
11
Montér bjælke-dæksler og pakninger
Install main carrier covers and PN-GS-300 / PN-PC-300 seals — seals match infill type.
BJÆLKER30 min -
12
Montér valgfri tagrende-forlængelse
Install optional PN-GE-300 gutter extension profile if specified.
AFSLUTNING18 min -
13
Montér tagrende- og vægprofil-endedæksler
Install gutter and wall profile end covers (PN-EC-300) — clean visual close-out.
AFSLUTNING12 min -
14
Fugn vægsamlingen og færdiggør systemet
Apply PN-SL-100 silicone at the wall joint and complete the system handover.
AFSLUTNING18 min
Om denne vægmonteret veranda med glas / polycarbonat-installationsvejledning
Luxa Vetra — Vægmonteret veranda med glas / polycarbonat · LuxaShade aluminium roof family. 14 steps · 2 installers · Edition 2026.1.
EN AW-6063 T6 alloy · QUALICOAT class 2 powder coating · EN 1991-1-4 wind-load rated · RTS-compatible motor wiring on motorised variants.
Hvorfor følge den officielle PONARC × LuxaShade-procedure
- EN 1991-1-4 · QUALICOAT class 2 · EN AW-6063 T6
- RTS-compatible motor wiring (motorised variants)
- Gutter slope 1.5% · drainage inside columns
- Edition 2026.1 · Januar 2026 · DA