INSTALLATIONSGUIDE
14 steg till en färdig Väggmonterad veranda med glas / polykarbonat.
Väggmonterad aluminiumveranda med fast tak i glas eller polykarbonat — vinterträdgårds-stil, 14-stegsprocedur med W (bredd) × P (utstickning) referensgeometri.
-
01
Placera markförankringarna
First action on the slab — anchor the two ground connections, mark W × P footprint.
STOMME25 min -
02
Sätt pelarna i markförankringarna
Insert the front PN-VP-100 pillars onto ground connections — plumb in two directions.
STOMME18 min -
03
Fäst väggprofilen mot väggen
Anchor PN-WP-100 wall profile at H1 / H2 height — laser-level the entire wall line.
STOMME25 min -
04
Montera främre rännprofil
Install the front PN-GU-300 gutter profile between pillars — finger-tight first.
STOMME22 min -
05
Montera avloppsrör och vattenavledare
Install drain tubes (PN-DT-100) and PN-WD-100 water drainers in the gutter.
STOMME12 min -
06
Förbered fästmuttrar för bärare
Pre-load PN-NT-080 channel nuts into all carrier-fixing positions.
STOMME12 min -
07
Sätt in huvud-bärprofilerna
Insert main carrier profiles (PN-MC-100, PN-MC-110 mid-span) front to wall.
BÄRARE30 min -
08
Fäst huvud-bärarna med konsoler
Fix main carriers with PN-BR-300 brackets at both ends — bracket alignment critical.
BÄRARE25 min -
09
Sätt in täckprofiler mellan bärarna
Insert PN-CP-300 cover profiles between carriers — defines glass/polycarbon channels.
BÄRARE25 min -
10
Sätt in glas- eller polykarbonat-fyllnadsskivor
Drop in PN-GL-300 glass or PN-PC-310 polycarbonate infill panels — handle with cups.
BÄRARE38 min -
11
Montera bärare-kåpor och tätningar
Install main carrier covers and PN-GS-300 / PN-PC-300 seals — seals match infill type.
BÄRARE30 min -
12
Montera valfri ränn-förlängningsprofil
Install optional PN-GE-300 gutter extension profile if specified.
AVSLUTNING18 min -
13
Montera ränn- och väggprofil-ändkåpor
Install gutter and wall profile end covers (PN-EC-300) — clean visual close-out.
AVSLUTNING12 min -
14
Täta väggfogen och slutför systemet
Apply PN-SL-100 silicone at the wall joint and complete the system handover.
AVSLUTNING18 min
Om denna väggmonterad veranda med glas / polykarbonat-installationsguide
Luxa Vetra — Väggmonterad veranda med glas / polykarbonat · LuxaShade aluminium roof family. 14 steps · 2 installers · Edition 2026.1.
EN AW-6063 T6 alloy · QUALICOAT class 2 powder coating · EN 1991-1-4 wind-load rated · RTS-compatible motor wiring on motorised variants.
Varför följa det officiella PONARC × LuxaShade-förfarandet
- EN 1991-1-4 · QUALICOAT class 2 · EN AW-6063 T6
- RTS-compatible motor wiring (motorised variants)
- Gutter slope 1.5% · drainage inside columns
- Edition 2026.1 · Januari 2026 · SV