VisioMod Porta — Gate Program

Name: PONARC GmbH
Address: DE

Formerly known as Porta Aluminium Gate Program

VF-PRT

Gate program for every VisioMod fence run — the entry point that speaks the same language as the boundary. Four gate types: pedestrian (max 1100 × 2000 mm), single-leaf swing (1500 × 2000), double-leaf swing (4000 × 2000 clear opening) and cantilever sliding (6000 × 2000). Eight infill designs matching the seven fence series plus mixed-line panels. Manual or RTS motorised drive (230 V or 24 V DC solar-compatible) with four access-control options: keypad, RFID, BLE smartphone, video intercom. 3D-adjustable hinges and integrated mortise lock standard.

KEY FEATURES

4 gate types: pedestrian / single-leaf / double-leaf / cantilever sliding
8 infill designs — matches the fence series
Manual or RTS motor
4 access control options
Manual emergency release standard

REQUEST INFO

TECHNICAL SPECIFICATIONS

Built to Standard.

Pedestrian gatemax 1100 × 2000 mm

Single-leaf swingmax 1500 × 2000 mm

Double-leaf swingmax 4000 × 2000 mm clear opening

Cantilever slidingmax 6000 × 2000 mm clear opening

MotorRTS 230 V or 24 V DC (solar-compatible)

AccessKeypad / RFID / BLE / video intercom

Hinges3D adjustable, heavy-duty

LockIntegrated mortise lock standard

Download Datasheet

fenceDetail.overviewTitle

VisioMod Porta is the gate program that completes every VisioMod fence run, transforming a perimeter into a finished, controlled boundary without breaking visual rhythm. Four gate typologies cover every site condition encountered on a typical project: a pedestrian gate up to 1100 × 2000 millimetres for foot traffic and service entries, a single-leaf swing gate up to 1500 × 2000 millimetres for narrow driveways, a double-leaf swing gate offering up to 4000 millimetres of clear opening for standard vehicle access, and a cantilever sliding gate spanning up to 6000 millimetres of clear opening where space, snow load or sloped approaches make swing operation impractical. Critically, every gate carries the same eight infill designs as the fence series, plus mixed-line panel options, so the gate reads as a continuation of the boundary rather than an interruption. This infill-matching strategy is what separates Porta from generic gate kits: when Lineo horizontal blades carry through, or when an Inciso laser-cut motif is used as a deliberate accent at the entrance, the architectural intent of the fence run is preserved at the most visually loaded point of the property. Drive options scale from manual operation for low-cycle residential pedestrian gates, through electromechanical 230 V actuators for daily-use swing and sliding gates, to fully RTS-motorised solutions available in 230 V mains or 24 V DC solar-compatible variants for off-grid and remote sites. Access control is offered in four modalities, each addressing a distinct workflow: keypad for shared-code entry on rental and service contexts, RFID for staff and resident credentialing, BLE smartphone for hands-free arrival, and video intercom for verified visitor admission. The hardware specification reflects commercial-cycle expectations: 3D-adjustable hinges allow precise alignment after foundation settlement and seasonal movement, and an integrated mortise lock is standard on every gate, not an upgrade. Stainless fasteners, marine-grade aluminium frames, sealed motor enclosures and tested cycle counts above 100,000 operations make Porta suitable for hotel, school and mixed-use boundaries.

fenceDetail.integrationKicker

fenceDetail.integrationTitle

The gate is the most scrutinised single element of any boundary, so Porta is detailed to read as continuation rather than interruption. The first decision is infill strategy: either the fence pattern carries unbroken across the gate leaf, which is the right move for long Lineo or Vento runs where rhythm is the design idea, or the gate becomes a deliberate accent using a different series, typically an Inciso laser-cut motif framed by the same posts, marking the entrance as a discrete event. Both readings are valid and Porta supports either without custom fabrication. Post sections at the gate match the fence post sections, so the eye does not register a thicker frame at the opening. Motor housings on electromechanical and sliding variants are specified either as below-grade foundation boxes or as concealed in-post units, removing the surface-mounted actuator that typically signals an aftermarket installation. Access-control hardware is finish-matched to the gate frame and recessed where possible.

fenceDetail.installKicker

fenceDetail.installTitle

Swing gates require a dedicated reinforced hinge-side post in 140 × 140 mm section, set in a concrete foundation sized to resist the cantilever moment of the leaf at full extension and full wind load. Cantilever sliding gates require a continuous reinforced track foundation along the full travel length plus the counterweight overhang, typically 1.5 times the clear opening, with embedded conduit for the drive and limit-switch wiring. Motor power and access-control low-voltage runs are pulled through separate conduits to the gate controller cabinet, which should sit within 15 m of the drive for voltage drop reasons. Access-control integration to the site network uses Cat 6 or fibre to the controller depending on distance and intercom video bandwidth. All foundations are detailed to local frost-zone depth in accordance with DIN EN 1997 (Eurocode 7), typically 800 to 1200 mm in central European climates.

VISIOMOD SYSTEM