Luxa Sereno 700 Bioclimatic Pergola

The structure is manufactured from extruded 6063-T5 aluminium, offering high strength-to-weight ratio, corrosion resistance, and long-term outdoor durability. All joints use stainless steel fasteners. Aluminium is 98% recyclable — making the Luxa Sereno 700 an environmentally responsible choice.

Standard modules: 3×3, 3×4, 3×5, 4×4, 4×5, and 4×6 metres. Maximum single-span width is 4 metres. For larger terraces, multiple modules can be coupled together, sharing intermediate columns. Custom dimensions are available on request.

Yes, extensively. Choose from any RAL colour with TIGER Coatings powder coat. Add LED lighting (warm white strips in roof profiles and columns), infrared heating panels, Bluetooth speakers, ZIP screens for side enclosure, or glass sliding walls. The system adapts to your vision.

The Luxa Sereno 700 is suitable for residential terraces, rooftop patios, garden areas, restaurant and cafe outdoor dining, hotel pool decks, and commercial courtyards. It can be installed freestanding on four columns or wall-mounted (lean-to) against an existing building.

The louvre blades open up to 115°, allowing daylight to filter in at any angle and providing natural air circulation. At 90° the blades are fully vertical, giving maximum ventilation. Beyond 90° they tilt further to let in low winter sun.

When the louvre blades are fully closed, the roof forms a sealed waterproof surface. An integrated gutter system channels rainwater through the concealed drainage inside the columns. The system handles standard rainfall effectively — for heavy storms, the drainage capacity depends on the module size.

The Luxa Sereno 700 is checked against the project snow zone and EN 1991 route; standard configurations are validated per site. Higher snow load ratings are achievable with additional support columns or reinforced profiles — consult your dealer for site-specific engineering.

The structure is tested to withstand wind speeds in accordance with EN 1991 loading standards. In high wind conditions, the louvres should be set to fully open or fully closed position depending on the wind direction. An optional wind sensor can automate this adjustment.

A standard single-module Luxa Sereno 700 (e.g. 4×4m) is typically installed in one working day by a two-person team. The quick-connect system and pre-assembled components minimise on-site work. Electrical connection for the motor requires a qualified electrician.

Building permit requirements vary by country, region, and municipality. In Germany, pergolas under 30 m² are often exempt in many Bundesländer, but local building authorities (Bauamt) should always be consulted. Your PONARC dealer can assist with the necessary documentation and static calculations.

The Luxa Sereno 700 requires minimal maintenance. Clean the aluminium frame and louvres 2–3 times per year with water and mild soap. Clear the drainage channels of leaves and debris before autumn and after winter. Lubricate moving parts annually. The powder-coated surface does not require repainting.